The Best Jobsite Table Saws Reviewed (Suitable for all budgets)

The Best Jobsite Table Saws

Looking for the best jobsite table saws on the market to complete that project? Stocking your workshop but simply don’t know where to begin looking for a jobsite table saw? We feel your pain!

Getting your tools right is the difference between a project that you enjoy completing, and a project that you can wait to complete. Having the correct tools for the job make everything easier, and certainly more fun. Yet when you type into Google, ‘ Best Jobsite Table Saws’, there are millions of results. It’s overwhelming!

That’s where Cutting HQ comes in. If you’re on the hunt for the best saw for the job, you’re in the right place! After years on the job, I certainly know a thing or two about jobsite table saws, and in this post, I will breakdown my top ten recommendations.

Best Jobsite Table Saws: A Growing Market

The table saw market is expected to reach a HUGE $823.5 million by the end of 2026. The best jobsite table saws will always continue to grow in popularity due to their efficiency and versatility.

What exactly is a jobsite table saw?

These specific saws combine the accuracy of circular saws and the durability of miter saws, meeting the needs of woodworkers and DIYers. A standard table saw should be able to make rip cuts in wood, large rough-cut boards, crosscut against wood grains, cut grooves, rabbet for wood joints, and angled bevel woodcuts.

Yet you can only enjoy the benefits of table saws if you are using the ones that are fit for the purpose. We’ve spent weeks researching and testing the best table saws on the market to make your selection easier.

Our Top 10 Picks of the Best Jobsite Table Saws

These are our top 7 picks for the best table saws in the current market.

SawStop Professional Cabinet saws were specially designed for heavy-duty work. This is the best table saw for small shop setups as it can handle any type of hard material without any hitch. The cuts are smooth, swift, and consistent. The machine also has many advanced features that make it safe to use.

For example, the SawStop Professional Cabinet Saw blade immediately stops when it comes in contact with skin. The blade’s stop time is about 5 milliseconds, reducing the risks of any serious injury.

Also, the saw’s arbor and trunnion are made from quality materials that let you cut with strength, stability, and precision. With its table flatness measured diagonally at a maximum gap of 0.010” and gas piston elevation, there’s room for adjustability and smoothness.

The machine is also equipped with the Overarm Dust Collection model, allowing it to collect 99% of the dust on the table. Blade guards also ensure dust is routed away from the blades and directed into the 4” port.

Finally, the machine has a control box where you can find the power paddle, an on-off switch, and an onboard computer that actively runs checks on all systems in the machine. We think this feature makes this the best table saw for home use by allowing you to know when and where the machine is having problems.

Key Specifications 

  • Dimensions (LxWxH): LxWxH44 x 29.75 x 34 inches
  • Length of Blade: 10 inches
  • Power: Three Horse-power
  • Table Saw Rip Capacity: 10 inches
  • Model Type: Cabinet
  • Number of Teeth: 40

Pros

Cons

  • Advanced Safety Features
  • Dust Collection
  • Durability and Longevity
  • Very Expensive
  • Very heavy and weighs over 400 pounds

The DEWALT DWE7491RS Jobsite Table Saw is one of the best affordable table saws in the current market. In addition to its relatively cheap price, it’s also popular for its efficiency and speed in cutting heavy materials. You can even say that this is the best table saw for the money.

The DeWalt Jobsite Table Saw weighs just 45 pounds, allowing easier movement. It also comes with a folding mount that lets you assemble the saw in seconds. The tool is also equipped with rollers that enable you to push it to different locations when not in use.

Equipped with a 10-inch blade and a rip capacity that can go as high as 32½ inches, you can make 3⅛-inch deep cuts into treated lumber and hardwoods. We consider this to be the best portable table saw so far.

The DEWALT DWE7491RS Jobsite Table Saw has a Rack & Pinion Telescoping Fence System that makes the adjustments of fences very smooth, fast, and accurate. The tool’s 15.0A high torque motor gives it the energy to cut through hardwoods and pressure-treated lumber.

Another benefit of this table saw is that it has space where you can store accessories safely. There’s nothing more tiring than looking for a guard you just used but can’t remember where you kept. The DEWALT DWE7491RS has a designated space where you can keep such things, saving you lots of time.

There are also two dust collectors. One is located close to the blade guard, whereas the other is beneath the table. Though it largely depends on the type of wood you’re cutting, the dust collectors should be able to retrieve 80% of the dust expelled.

Lastly, DEWALT DWE7491RS is one of the best table saw for home/shop as you can use it for both heavy and light works. It is also one of the best table saws for DIY works. The tool doesn’t take much to learn and operate; its weight is also a bonus.

Key Specifications

  • Dimensions (LxWxH): 31 x 24.5 x 31 inches
  • Length of Blade: 10 inches
  • Rip Capacity: 32½ inches
  • Number of Teeth: 24.

Pros

Cons

  • Wheeled and Folded Stand 
  • Rack & Pinion Telescoping Fence System
  • Large Rip Capacity
  • The miter gauges are not always accurate 

You might never know the value of a light table saw until you use one. Table Saws, in general, are seen as heavy tools, but the Evolution – RAGE5-S Table Saw has done its best to break that narrative.

In addition to weighing less than other table saws, the Evolution – RAGE5-S Jobsite Table Saw is also sharp and accurate in cutting. However, even with all the pros already listed, the R45101’s most standard quality remains to be its SUV.

You may be confused right now; you might not have heard about SUV. Luckily, you are about to find out, and when you do, I think you’ll be wishing your table saw had one!

SUV is short for Table Saw Utility Vehicle and is one of the reasons the RAGE5-S is so portable.

It has handles and wheels that allow the saw to be moved easily. The stand is so advanced that it allows you to set up the table saw in under 5 seconds. How fast is that? These are the reasons why we consider this the best jobsite table saw.

There is also an onboard storage space for accessories. So, you have a place to safely keep your guards, pawls, and wrenches without forgetting. The table saw’s power switch is located on the table, saving you the time used to fumble around for the power switch.

It might just be the best DIY table saw in existence. In fact, we can even say that this is the best jobsite table saw for woodworking.

Another major pro of the RAGE5-S is that it allows for easy installation after dismantling. Even with detailed guides, you’ll find it difficult to reinstall the anti-kickback prawns, riving knife, and blade guard of most table saws out there. With the RAGE5-S, you can install these three parts in under thirty seconds. It is one of the best table saws for home shop.

Key Specifications

  • Number of Teeth: 24
  • Blade Length: 24 inches

Pros

Cons

  • Portable and durable
  • Multi-functioning blade
  • Has extensive sides for versatility
  • Due to the arbor size, getting quality blades is difficult

If you are looking for a portable and affordable table saw, especially if you’re a hardcore DIYer, the SKIL TS6307-00 Table Saw is exactly what you need. It comes with a standard saw made from heavy-duty steel and can cut through most materials. The saw can be folded and easily lifted. Basically, it has all the qualities of a benchtop table saw.

Despite its relatively small shape, the SKIL TS6307-00 Table Saw is a very powerful tool. It has a motor that can power up to 5000 RPM. The power, combined with its strong blade, should be enough to cut through most materials, making this model the best table saw for beginners.

 

However, don’t expect it to cut through a 4-inch thick hardwood; you’ll only be wasting your time. The SKIL TS6307-00 is a portable table saw and a very affordable one, too!

Like most other portable table saws, the SKIL TS6307-00 comes with a 10-inch blade. It also comes with a carbide-tooth blade that is common among portable blades. These blades are not the best, and it’s advisable to buy better ones. After all, using a table saw without good blades is tiring and stressful.

The saw’s ripping capacity is 24.5 inches and is exactly what you’d expect from a portable table saw. The major problem with the SKIL TS6307-00 is that its bevel adjustment and blade height are both controlled by a single handle. Making it difficult to set a precise bevel or height.

With the two levels being controlled by one handle, attaining precision becomes a tough game. Attaining precision with a single handle is not impossible, but you need to take lots of time before getting what you’re looking for.

With the SKIL TS6307-00 Table Saw, you’ll be getting one of the best benchtop table saws at a very affordable price. This portable table saw has a powerful motor and sharp blades that can cut through most materials. This makes it the best table saw for DIY projects.

However, the lack of a quality fence makes it a difficult tool to use. Although descriptions claim the fence is self-aligning, there’s a high chance this is not true. To be on the safe side, you’ll have to adjust and double-check that it’s square before you use it.

Another problem of the SKIL TS6307-00 is the absence of dust management. Most table saws usually come with one to two dust collectors to help keep the table clean and saw dust free.

They also have modern safety features like a riving knife, anti-kickback pawls, and a blade guard. However, they’re not entirely perfect. For example, you cannot adjust the riving knife around the blade. So, if you want to make a non-through cut, you’ll have to take the riving knives off. This is a massive blow to safety.

Key Specifications

  • An integrated folding stand
  • 4×4 Cutting Capacity
  • Number of Teeth: 24
  • Parallel Blade Alignment

Pros

Cons

  • Durable and portable
  • Powerful motor
  • Affordable and lightweight
  • A single handle controls the bevel adjustment and blade height
  • Lack of dust management
  • Poor fence
  • Poor Glades

Table saws are generally power-intensive, and that’s why most of them use electric cords. Without a great amount of energy, they can’t function. However, while the cord is vital to the tool’s power, it can also cause discomfort, especially when you have to move the tool.

Thanks to new battery technologies being developed every year, saws like the Milwaukee Cordless M18 Fuel One-Key table saw can afford to generate more power without the use of cords. The saw uses an M18 battery that you can use to cut through 600 feet of a linear board before it runs down.

You’ll be enjoying the saw for a long time without fear of interruptions caused by a low battery. Because of this, we consider this the best portable table saw on the market right now.

The Milwaukee Cordless M18 Fuel One-Key table saw is equipped with a POWERSTATE Brushless Motor that can go as high as 6,300 RPM. This is better than most corded saws. Also, with the pre-installed REDLINK PLUS Intelligence, you don’t have to worry about overloading, over-discharging, and overheating again; you’ll hardly believe that this powerful table saw is cordless.

The rack and pinion fence allows for fast adjustments and accurate cutting. Plus, to ensure your safety, the saw has riving knives that you can adjust around the blades and storage for accessories to ensure everything is safely kept.

The Milwaukee Cordless M18 Fuel One-Key table saw is ONE-KEY compatible. This makes it the first table saw that allows a wireless connection between the tool and your smartphone. With this feature, you can track the performance and location of your tool while enjoying the best portable saw for 2022.

The fact that it’s ONE-KEY compatible is why it is loved so much. Imagine being able to monitor your tool from 100 feet away. You don’t even need the tool’s battery to be inserted; once you’ve connected it to your smartphone, you can begin monitoring. Plus, you’ll get regular updates on the machine’s use, and if there’s any fault with it, you’ll be alerted.

The ONE-KEY feature is paired with the Integrated Tool Security. Together, you’ll be updated with the latest technology you can use to protect your machine from theft. There’s also a hidden tool that gives you authoritative control over your machine, and with this feature, you’ll be the only one able to see the machine when it’s within range.

Also, if the property gets stolen, you can shut down the machine entirely, all from your smartphone. So, the machine will basically be useless to the person who stole it.

Key Specifications

  • 6,300 RPM
  • Battery Type: 18V Lithium-Ion
  • Battery System: M18

Pros

Cons

  • Cordless and powerful
  • Long battery life
  • REDLINK PLUS Intelligence for overload protection
  • Very expensive

Hybrid saws are generally preferred because of their ability to combine the features of cabinet and contractor saws, but most of the time, this combination leads to the saw missing some important details. This is not the case with the Shop Fox W1837 10″ Hybrid Table Saw, and frankly, it’s one of the best table saws out there.

For starters, the tool comes with a riser system and built-in wheels. With this, you can easily adjust the tool’s height and move it around without stress. The fence design can be compared with that of some of the best contractor table saws in that it is highly sturdy and precise.

Slightly pushing the foot levers will allow you to lift the fence easily. With this, you’ll be able to set up and start working in under a minute. We figure this alone makes this the best table saw for home use.

The Shop Fox W1837 10″ Hybrid Table Saw also gives you a lot of space to work with. Its 40-1/4″ x 27” workstation is similar to that of most cabinet saws, and you’ll also be getting the same sturdiness as a cabinet saw.

It also comes with a 2 HP motor that can allow the tool to rip through most materials. The attached saws are of good quality and power up to 3450 RPM. In addition to that, the Shop Fox W1837 10″ Hybrid Table Saw is a friendly tool for miters, bevels, and cutting chamfers because you can tilt the blade on the tool to 45 degrees.

The hybrid table saw also features a dust collection system with an enclosed upper stand that stores all the dust from the tool. Flexible wings are around the guards to stop dust from escaping from the sides of the cut, placing it among the best compact jobsite table saw available.

The Shop Fox W1837 10″ Hybrid Table Saw is one of the best budget table saws you can get on Amazon. It allows for multiple cuts and has a dust collection system that keeps the tool tidy. The W1837 also comes with a fence design that provides accurate and smooth cutting.

If you have used a hybrid table saw before, you’ll know that they mostly have problems with overheating, but with the W1837, you won’t have to worry about that. It comes with a thermal overload protection system that maintains the machine’s temperature at all times.

This system also helps maintain the machine if the input current starts fluctuating. The W1837 is one of the best woodworking table saws and is definitely one you’ll enjoy using.

Key Specifications

  • 2 HP motor
  • 3450 RPM max
  • Table Saw Rip Capacity: 30 inch
  • 4-inch Dust chute port
  • Miter gauge.

Pros

Cons

  • Built with solid cast iron trunnions, they produce less vibration and noise 
  • Can run on either 240 or 120 Volts 
  • Durable and sturdy like most cabinet saws but weighs less (250 pounds)
  • One of the best 10-inch table saw, thanks to its powerful motor and rip capacity
  • Not good at cutting wide wood pieces

There’s no doubt that they’re probably a million portable table saws. But only a few of them can boast of the Bosch GTS1031 10-Inch Portable Jobsite Table Saw’s power. We consider this the best portable table saw for the money due to its quality.

You might be able to carry it around easily and even use it to cut some materials at home. However, when you decide to take it to a jobsite and cut a piece of wet lumber, you might blow its motor.

With the Bosch GTS1031, you’ll get portability and power. Its 15-amp motor is enough to handle hard materials, with brushes that can be replaced so that the saw can last longer. The GTS1031 also comes with well-greased handles that make it easy to adjust the bevel and blade height in no time.

This is a problem common with most portable jobsite table saws, but with the GTS1031, you can lower or raise the blade in any way you please without any hassle, making it one of the safest and best table saw for woodworking.

The Bosch GTS1031 is not only powerful and portable, but it is also very safe to use. It comes with a barrier guard that prevents the fingers from coming close to the blades. There’s also a riving knife locked into the lower and upper positions by two sets of pins.

The GTS1031 also makes reinstallation very easy and fast. In under two minutes, you should be able to dismantle and assemble the saw. Even the blade systems are easy to remove and reinstall, a feature that’s not common to most portable saws. The GTS1031 is one of the best jobsite table saws, and that’s why you’ll always find it in most job site table saw reviews.

Key Specifications

  • Number of Teeth: 50
  • 4 HP motor
  • It can go up to 5,000 RPM.

Pros

Cons

  • The SquareLock 18-inch rip fence allows for precise and smooth cutting
  • Portable and lightweight (52 pounds)
  • A smart guard system
  • More expensive than other portable table saws

When buying a table saw, there are things you need to look out for. We’ll discuss some of them below.

1. The Type

There are two main forms of table saws: stationary and portable. However, these forms are divided into different types.

Jobsite Table Saws: These table saws are lightweight and very easy to move from one jobsite to another. They are bigger and sturdier than benchtop saws and are generally good for professional woodworkers and DIYers.

Benchtop Table Saws: These table saws are designed to sit on a workbench. They can’t stand on their own and are good for lightweight work and DIYers. They are one of the cheapest table saws out there; the only problem is that they can’t handle large boards.

Contractor Table Saws: These table saws are like jobsite table saws; the only difference is that they are a bit larger, more powerful, and can handle harder materials. However, some of the best contractor table saws are still called jobsite table saws.

Cabinet Table Saws: These are professional table saws mostly found in carpentry or woodworking shops. They are very heavy and powerful and can cut through most hard materials.

They are called cabinet saws because they have a cast iron cabinet covering their structure to reduce vibration. This cabinet also aids in dust collection and general safety.

Finally, hybrid table saws have the features of both cabinet and contractor table saws.

2. Motor

There are two types of motors that table saws use: induction motors and universal motors.

Universal motors are linked directly to the saw’s blade, bringing more power to the blade. The only downside to this motor is that it is very loud. Thus, it is mostly used in portable table saws.

Induction motors are linked to a belt, and from there, power is transferred to the saw’s blade. This makes the motor less noisy, but the downside to this type of motor is that it requires a high maintenance cost. Plus, the belt’s tension needs to be adjusted periodically. You can find these types of motors in stationary table saws.

3. Components

Here are some basic components you need to consider when choosing a table saw to buy.

Table: The size and material used to build a table will determine the size of the board it can carry. Always go for cast iron tables; they are stronger and have fewer vibrations when compared to aluminum tables.

Blade: A 10-inch blade is a standard for most table saws. You can get a 12-inch blade if you’re looking to go bigger. There are also 8½-inch blades.

Blade Guards: They are made from transparent plastic and protect the machine operator from flying sawdust and any blade-related injury.

Miter Gauge: This is used to secure the board for miter cuts and can be adjusted between 0 and 90 degrees.

Anti-Kickback Pawls and Riving Knives: They prevent the board from kicking back at the user. If this goes unchecked, it can lead to serious injuries.

The Bottom Line

Whether you are a professional woodworker or just an average DIYer, you will need the best table saw to ensure smooth and accurate cutting. The best table saws have high rip capacities and good safety features.

www.cuttinghq.com
Logo
Enable registration in settings - general